Bobcat S750 Skid Steer Loader – Tough Enough for Grain & Hard Work

What is the Bobcat S750?

The Bobcat S750 is a skid steer loader that handles messy, tough jobs. It’s great for grain work, big warehouses, and port jobs.

As a top Bobcat skid steer loader, it stays steady. It fits in tight spots. And it keeps dust out—perfect for businesses that can’t stop working.

We just delivered three S750s to COFCO (Dongguan) Cereals and Oils. They’re part of a major national company.

COFCO needed a machine to clean grain out of ship holds. It had to stay steady enough for food-safe work.

The S750 won them over. It has a special single-point lifting setup—makes it easy to hoist into holds. And it handles dusty places really well.

Key Specs

• Operating Weight: 8,325 lbs 
• Engine Power: 74 hp
• Load Capacity: 3,100 lbs
• Standard Hydraulics: 17.1 gpm 
• High-Flow Hydraulics (Optional): 26.9 gpm 
• Top Speed: Up to 7.3 mph 
• Ground Clearance: 8.4 in (213 mm)
• Length with Bucket: 130.3 in (3,310 mm) 
• Width: 68 in (1,727 mm) 
• Dust Resistance: Sealed cab option with HEPA filter – keeps dust off the engine and operator

Product Photos

Bobcat S750 with its single-point lifting setup—ready to clean grain from ship holds

Three new S750s arrive at COFCO’s Dongguan facility, ready to get to work

Handover day between Guangzhou Supeng Engineering Machinery and COFCO

Testing the S750 on-site to make sure it meets COFCO’s grain-handling needs

Our service team walking COFCO operators through how the S750 works and how to keep it running

Final check for the S750—making sure it’s safe and works like it should

What Makes It Stand Out?

Compared to other compact skid steer loaders, the S750 has big advantages for grain, food, and industrial work:

• Single-Point Lifting: Easy to hoist into ship holds or high warehouse areas. No extra rigging needed. Exactly what COFCO needed for their ship hold work.
• Rock-Solid Stability: Heavy enough and low to the ground to avoid tipping. Even with lopsided grain loads. Super important for keeping food safe and operators protected.
• Keeps Dust Out: Sealed engine area and optional cab with HEPA filter block grain dust. Means less fixing and longer engine life.
• Swap Tools Fast: Bobcat’s quick-hitch lets you change grain buckets, augers, or sweepers in under a minute. Keeps work moving.
• Safe for Food Work: Easy-to-clean surfaces and non-toxic hydraulic fluids meet food industry rules. Perfect for COFCO’s edible oil and grain work.
• Tough Build: Reinforced steel frame and heavy-duty tires handle scratchy grain and daily use. Backed by Bobcat’s 5-year/5,000-hour frame warranty.

How to Use the S750

1. Check Before You Start (5 Minutes)
   • Check the grain bucket for cracks or wear. Replace it if damaged to avoid spills.
   • Check hydraulic fluid and engine oil levels. Low fluid makes tools slow down.
   • Test the single-point lifting setup (if using it for ship holds). Make sure locks are tight.
   • Clean the cab air filter (if working in dust). So you can see and breathe easy.
2. Start Up & Warm Up (2 Minutes)
   • Get in, buckle up, and adjust the seat. So you can reach all controls.
   • Turn the key to "on". Wait for the dashboard to check itself. No warning lights means you’re good.
   • Start the engine and let it idle 2 minutes. Really important in cold weather to protect the hydraulics.
3. Basic Grain Handling
   • Use the left joystick to drive to the grain pile. Go slow in tight ship holds or warehouses.
   • Lower the bucket with the right joystick. 
   • Lift the bucket high enough to clear obstacles. Then tilt it back to hold the load securely.
4. Shut Down & Clean Up (3 Minutes)
   • Wipe down the bucket and cab outside to get rid of grain dust. Keeps it from building up.

What You Get Out of It

Choosing the S750 isn’t just buying a machine. It’s an investment that helps you get more done with less trouble:

• Faster Work: COFCO said they’re cleaning ship holds 40% faster with the S750 than their old equipment. Gets jobs done quicker.
• Safer Work: Stays stable and the sealed cab keeps operators safe from dust and tipping. Fewer accidents.
• Follows the Rules: Meets food and industrial safety standards. Avoids fines for using non-compliant equipment.
• Does It All: Works with over 70 Bobcat tools. No need to buy separate machines for grain handling, cleaning, or loading.

Meets Global Standards

The S750 passes international rules for quality, safety, and the environment:

• FDA Food Contact Compliant – Safe materials and easy cleaning meet U.S. food safety rules
• OSHA 1926.602 – Follows U.S. safety rules for construction and industrial equipment

Make It Yours

You can tailor the S750 to your needs with these options:

• Tools: Grain buckets (different sizes), augers, sweepers, and pallet forks. Pick what fits your work.
• Cab Choices: Open-air (for warm places) or sealed cab with heat/AC and HEPA filter (for dust or cold).
• Tracking: Bobcat Connect (optional). Check where the machine is, how much fuel it uses, and when it needs maintenance—all from your phone or computer.

How It’s Built – And Why It Lasts

Bobcat builds the S750 to go the distance. Here’s how we make sure it’s quality:

1. Design: Engineers use 3D models and stress tests. To make sure the frame handles heavy loads and fits in tight spots.
2. Parts: Engines, hydraulics, and steel frames come from trusted suppliers. Tested to last.
3. Assembly: Skilled techs build each S750 by hand. With 15+ checks (like testing hydraulic pressure).
4. Testing: Each machine gets 2 hours of real-world testing. Loading grain, using tools, handling dust—to make sure it works as promised.
5. Final Check: Independent inspectors look for defects, safety issues, and performance. Only machines that pass get shipped.

What Customers Say

Common Questions